ADAS Requirements Reference
Audi ADAS Calibration Requirements
Audi specifies dynamic ACC calibration and front/peripheral camera recalibration any time mounting positions shift or rear-axle geometry is adjusted — procedures executed via the Vehicle Diagnostic Tester. Level 5 Solutions has handled Audi driver-assistance calibrations across multiple platforms using OEM-recommended methods.
What Audi requires — by repair
When Audi requires ADAS recalibration
Wheel alignment & suspension
- ACC module (J428) dynamic calibration is required whenever its mounting position changes or rear-axle toe/camber is adjusted; Audi recommends dynamic over static, via the Vehicle Diagnostic Tester.Source: Audi — D4B80A25688, "A3 2020–2021 Driver Assistance Systems" (Ed. 07.2022)
- Front camera (R242) calibration is required when its installation position changes or rear-axle toe/camber is adjusted.Source: Audi — D4B80A25688, "A3 2020–2021 Driver Assistance Systems" (Ed. 07.2022)
Sensor, camera & radar R&R
- Each peripheral camera must be individually calibrated after removal and reinstallation.Source: Audi — D4B80A25688, "A3 2020–2021 Driver Assistance Systems" (Ed. 07.2022)
Proven on real Audi work
Level 5 Solutions has performed 850+ documented Audi jobs across 2002–2026 models — to the OEM procedures above, fully documented.
Frequently asked
Audi ADAS, answered.
- Does an Audi wheel alignment always require ADAS recalibration?
- If rear-axle toe or camber is adjusted, yes. Audi bulletin D4B80A25688 requires both ACC (J428) dynamic calibration and front camera (R242) calibration after any rear-axle toe/camber change.
- Source: Audi — D4B80A25688, "A3 2020–2021 Driver Assistance Systems" (Ed. 07.2022)
- Can Audi ACC calibration be done statically?
- Audi's bulletin recommends dynamic calibration over static for the J428 ACC module — a road drive via the Vehicle Diagnostic Tester is the preferred method.
- Source: Audi — D4B80A25688, "A3 2020–2021 Driver Assistance Systems" (Ed. 07.2022)
Need a Audi calibrated to these specs?