ADAS Requirements Reference
Acura ADAS Calibration Requirements
Honda and Acura ADAS calibration is governed by the same joint procedure, using the Bosch-co-developed SCT-418 static calibration system. Level 5 Solutions is equipped with the SCT-418 and has performed Honda and Acura calibrations across a wide range of collision and glass repair scenarios.
What Acura requires — by repair
When Acura requires ADAS recalibration
Wheel alignment & suspension
- A wheel alignment must be verified and corrected before camera aiming on any collision-involved Acura — the SCT-418 procedure is only valid when the vehicle is at proper ride height and alignment spec.Source: Honda — II-2-22, "ADAS Calibration Equipment: SCT-418" (Aug 2022)
Sensor, camera & radar R&R
- Acura ADAS camera aiming uses the SCT-418 static calibration system; the procedure requires the vehicle to be on a level surface with the calibration target precisely positioned per the tool's setup guidance.Source: Honda — II-2-22, "ADAS Calibration Equipment: SCT-418" (Aug 2022)
Proven on real Acura work
Level 5 Solutions has performed 650+ documented Acura jobs across 1995–2026 models — to the OEM procedures above, fully documented.
Frequently asked
Acura ADAS, answered.
- What calibration equipment does Acura require?
- Acura (covered under Honda bulletin II-2-22) requires the SCT-418 static calibration system, co-developed by Honda and Bosch, for camera aiming procedures. Level 5 Solutions is equipped with this tool.
- Source: Honda — II-2-22, "ADAS Calibration Equipment: SCT-418" (Aug 2022)
- Does an Acura need a wheel alignment before camera calibration?
- Yes. Honda/Acura bulletin II-2-22 requires that wheel alignment be verified and corrected on any collision-involved vehicle before camera aiming is performed — alignment errors will produce an inaccurate calibration.
- Source: Honda — II-2-22, "ADAS Calibration Equipment: SCT-418" (Aug 2022)
Need a Acura calibrated to these specs?